- Brands FRONIUS
- Product Typ MMA/Tig DC
- PFC technology lowers input amps required
- Sturdy, impactproof housing
- Generator compatible
- V-down Celulose electrodes
- Thermostat controlled fan
- Removable steel mesh dust filter
- Ideal for the typical welding job: Rod-electrode and TIG welding with lift arc ignition
- Suitable for construction sites and workshops
- Remote controllable version (RC version)
- S-mark, CE-mark and C Tick
- Automatic timed switch off to save energy
TP150
The new generation of TransPocket 150/180 devices brings a high degree of flexibility.
The integrated PFC (Power Factor Correction) technology supports the use of extremely long mains leads of up to 100 m in length. The operating concept has also become even more intuitive.
A 7-segment display makes it possible to quickly read off the parameters that have been configured. In addition, the display is slightly set back and therefore well protected against damage.
Easily comprehensible setup settings are a tremendous help in simplifying operation.
Description
The
new generation of TransPocket 150/180 devices brings
a high degree of flexibility. The integrated PFC (Power Factor Correction)
technology supports the use of extremely long mains leads up to more than 100 m
in length. The operating concept has also become even more intuitive. A
7-segment display makes it possible to quickly read off the parameters that
have been configured. In addition, the display is slightly set back and
therefore well protected against damage. The easily comprehensible setup is a
tremendous help in simplifying operation.
Includes
Features
SoftStart
The SoftStart function
ensures a stable arc at the start of welding and was specially developed for
electrodes that are welded with a low welding current (basic electrodes)
Anti-stick
If a short circuit occurs that causes the electrode
to stick during MMA welding, the power source is switched off immediately. This
prevents the electrode from burning out
HotStart
To make the electrode easier to ignite, the current
at the power source is increased for a fraction of a second during ignition.
The HotStart function was specially developed for
welding with rutile and Cel electrodes.
Specifications
|
|
|||
|
Welding
current / Duty cycle [10min/40C] |
150A / 35% |
||
|
Welding
current / Duty cycle [10min/40C] |
110A / 60% |
||
|
Welding
current / Duty cycle [10min/40C] |
90A / 100% |
||
|
Operating
voltage |
20,4V - 26,0V |
||
|
Open-circuit
voltage |
96,0 V |
||
|
Mains
frequency |
50-60Hz |
||
|
Mains
voltage |
230V |
||
|
Mains fuse |
16A |
||
|
Dimension
/ b |
130,0 mm |
||
|
Dimension
/ l |
365,0 mm |
||
|
Weight |
6,5 kg |
||
|
Degree of
protection |
IP23 |
||
Warranty